Audio-Technica ATND1061LK Beamforming Array Microphone with Audio-Technica-Link
Audio-Technica ATND1061LK Beamforming Array Microphone with Audio-Technica-Link
Made to order — Delivery in 7 business days
Our team is here to help.
Доставка
Made to order — Delivery in 7 business days (Поръчки изпратени до 17 часа в работен ден се обработват през същия работен ден, а поръчки изпратени след 17 часа или в неработен ден се обработват през следващия работен ден.)
Безплатна доставка за поръчки над 50€
Гаранция
12 месеца
About the product
Daisy-chain connection for multi-channel transmission
Audio-Technica LINK (*1) is a proprietary communication protocol developed by Audio-Technica. It leverages IP (Internet Protocol) technology for transmission of uncompressed multi-channel digital audio and for information control with minimal latency. One of the key advantages of Audio-Technica LINK is the ability to power Audio-Technica LINK endpoint devices, eliminating the need for a power cable or standard PoE switch.
The protocol allows the transmission of multi-channel digital audio signals from endpoint devices to be individually assigned to the input channels of Audio-Technica’s ATDM line of mixers. This flexibility enables efficient system audio routing and control.
One notable benefit of Audio-Technica LINK is a reduced number of audio cables required. By utilizing general-purpose LAN (Local Area Network) cables (*2), the protocol eliminates the need for multiple analog audio cables for multi-channel transmission. This significantly simplifies cable management and installation processes.
Another advantage of Audio-Technica LINK is its daisy-chaining capability. Multiple Audio-Technica LINK devices can be interconnected in a chain, making installation and setup even more convenient. This feature sets it apart from other IP technology-based communication protocols that typically require a star topology connection to an Ethernet (PoE) switch.
Audio-Technica LINK offers a variety of benefits, including uncompressed digital audio transmission, low latency, power for endpoint devices, reduced cable routing, and simplified installation through daisy-chaining. These features make Audio-Technica LINK a compelling communication protocol for professional audio applications.
*1 Audio-Technica LINK works only between Audio-Technica devices and cannot be used with general Network switches.
*2 LAN cables must be CAT 5e or higher and shielded with a conductor size of 24 AWG diameter or larger.
- Daisy-chain connection for multi-channel transmission
- Instantly locates the speaker and adjusts the beam without picking up unwanted noise
- Microphone can identify typing sounds and paper flipping noises
- No need for microphones or cables at the table
- Same size as a wireless LAN access point
- Control zones and various settings with dedicated software
|
Power requirement |
+48 VDC (Audio-Technica LINK) |
|
Power consumption |
Max. 5.2 W |
|
Operation temperature range |
0°C to 40°C (32°F to 104°F) |
|
Operation humidity range |
25% to 85% (Non condensing) |
|
Dimensions |
227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) （W × D×H) |
|
Weight |
1243 g (44 oz) |
|
Plenum rating |
UL 2043 |
Microphone
|
Beam width |
90° |
|
Polar pattern |
Beam pattern |
|
Frequency response |
60 Hz to 18,000 Hz |
|
Sensitivity |
-8 dBFS (1 kHz, 94 dBSPL) |
|
Dynamic range |
89 dB (A-weighted) |
|
Signal to noise ratio |
61.5 dB (A-weighted) |
|
Self-noise |
25 dBSPL (A-weighted) |
|
Maximum input sound level |
102 dBSPL |
Analog audio
|
Frequency response |
20 Hz to 20 kHz (+1.0/-2.0 dB) |
|
Dynamic range |
100 dB (A-weighted) |
|
Signal to noise ratio |
80 dB (A-weighted) |
|
Headroom |
20 dB |
|
Residual noise |
-75.8 dBu (A-weighted) |
|
T.H.D |
<0.1% (1 kHz, unity) |
|
Analog input |
MIC Maximum: -30 dBu MIC Unity: -50 dBu LINE Maximum: +12.2 dBu LINE Unity: -10 dBV, Switchable |
|
Analog output |
OUTPUT Maximum: +19.2 dBu OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable |
Other
|
Network |
Audio-Technica Link: 100 Mbps IP control: 100 Mbps |
|
Digital audio |
Sampling rate: 48 kHz Bit depth: 24-bit |
|
Latency |
Microphone (CH1 to CH6): 47 msec Microphone (Auto Mix CH): 79 msec |
|
I/O connector |
Network/ Audio-Technica Link: RJ-45 Analog input: Euroblock 3-pin Analog output: Euroblock 3-pin GPI: Euroblock 3-pin |
|
Phantom power |
Analog input: 12 V |
|
Included accessories |
・IR remote controller ・Surface mount adapter ・Screw (M4 × 50 mm) × 4 ・Flush mount adapter ・Flush mount cover ・Screw (M4 × 10 mm) × 12 ・Hole cover ・Nut × 4 ・Snap bushing × 2 ・Tile bridge A × 2 ・Tile bridge B × 2 ・Tile bridge C × 4 ・Seismic cable ・Zip tie ・Safety belt ・Euroblock connector × 3 ・Installation template |
