Ferrofish P16DXSM Pulse16 DX with Dante and Singlemode SFP Module

ATTENTION: This listing is for a Pulse16 MX with a MADI module in a single-mode configuration. The single-mode configuration of the optical MADI module is rare and only suitable for other MADI devices that also have single-mode optical modules. The majority of MADI devices on the market use the multimode configuration!

The PULSE16 converts 16 x 16 balanced analog inputs and outputs to studio-quality ADAT and MADI I/O at up to 96 kHz. ADAT is already widely available as a cost-effective and sophisticated interface, so expanding your studio with 16 x 16 analog channels with the PULSE16 is a breeze. Additionally, the existing 32 x 32 ADAT channels can be routed to and from the MADI and DANTE channels alongside the analog channels.

The low-latency A/DD/A converters, accompanied by a temperature-compensated clock and a jitter-reducing PLL, guarantee the best crystal-clear sound. All this packed into a compact 1U chassis, the PULSE16 DX delivers studio levels of up to +20 dBu, individually adjustable in 1 dB steps, across a total of 32 jack connectors. Thanks to the 4 x 4 ADAT interfaces, 16 x 16 channels can be easily converted even at 96 kHz without reducing the channel count – or even via the 64 x 64 MADI and DANTE channels, which are reduced to 32 x 32 channels at 96 kHz.

Configuring the device is child's play thanks to the two TFT screens. There's no need to consult the manual; all information is clearly displayed on the screens. Remote control via MIDI is also possible thanks to the free RemoteFish app (PC and Mac).

The headphones can reproduce almost any analog or digital input or output: ideal for quickly checking signals.

FEATURES PULSE16 D X

• A/DD/A converter with 16 balanced analog inputs and outputs with +20dBu
• Input and output levels can be individually adjusted in 1dB steps
• 32×32 digital channels via 4 ADAT I/O sockets enable the conversion of 16×16 channels even at 96k
• 64×64 digital channels of the MADI interface via optical SINGLEMODE SFP module, coax module optionally available.
• 64×64 digital channels of the DANTE interface in redundant Pri/Sec design
• Monitoring matrix of almost all digital and analog inputs and outputs to stereo headphone output
• All analog and digital inputs and outputs on the rear of the device are freely routable in groups of 8 channels
• Preset Management
• Wordclock generator and receiver with proprietary jitter reduction circuit