Ветробран Rycote Modular Windshield WS 4 Kit - за микрофони от 211mm до 280mm

Модулен комплект ветробран състоящ се от окачване, ветробран и плюшено покривало.
Комплектът Modular Windshield WS 4 е подходящ за кондензаторни микрофони с  дължина от 211 mm до 280 mm, диаметър 19-34 mm и 3-пинова XLR връзка като Sennheiser MKH 416, MKH 60 иSchoeps CMIT 5.

Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology Ideal for popular mics such as Sennheiser MKH 416 and Schoeps CMIT 5U. See compatibility tab for full list of mics

The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.
A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Modular Suspension
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.

Windshield
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.

Windjammer
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.

Windshield Body Length: 330mm
Total Windshield Length: 440mm (includes the End Caps)
Height of Windshield 100mm
Net Weight: 0,7kg
Gross Weight: 1.46
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-3F
Max Wind-noise Attenuation: 50 dB

Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.

Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.

For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.

Съвместими модели:

1 x Connbox CB1 (XLR-3F)
Product Code: 016901
Suitable for mono microphones with 3-pin XLR.

1 x XLR Holder MK II
Product Code: 048493
The XLR Holder Mk II fits between any 3/8" male threaded boom pole or mic stand and any 3/8" female microphone shock-mount or windshield system

1 x Boom Poles Adaptor
Product Code: 048402
 

1 x Pair of Single Lyre 72 (19/25) (with modular adaptor & screws)
Product Code: 042210
Universal Lyre, 72 shore, with Black rigid part & Grey Soft-grip is suitable for microphones of 19/25 mm diameter and is used on Small & Medium Suspensions

1 x Pistol Grip Handle with Lever
Product Code: 048401
 

1 x Pair of Duo-Lyre 68 (19/34) (with adaptor & screws)
Product Code: 040137
 

1 x Windjammer WJ 4
Product Code: 021504
Suitable for use with the Windshield 4

1 x Windshield WS 4
Product Code: 010604
Suitable for mic lengths 246mm up to 280mm in length,

1 x Suspension Medium (XLR-3F) 68 Duo
Product Code: 040146
Suitable for shotgun microphones in a WS 4 or WS 295