Free delivery to Econt office
for orders over 100 BGN
Audio-Technica BP4025 LARGE DIAPHRAGM X/Y MICROPHONE
Free delivery to Econt office
for orders over 100 BGN
Please fill your E-mail address where you want to receive the availability notification for Audio-Technica BP4025 LARGE DIAPHRAGM X/Y MICROPHONE or your contact phone number.
-
UNIQUE CONFIGURATION OF A LARGE COINCIDENT DIAPHRAGM CAPSULE
Unlike most X/Y stereo microphones where the capsules form a 90° stereo image, the BP4025 has ingenious arrangement of its large capsules for stereo more "realistic" 120° image. The two capsules are mounted back-to-back on the same electronic circuit.
This is a unique configuration of coincident large diaphragm capsules for impeccable sound quality and exceptionally low noise level. The audio reproduction - thanks to the excellent channel separation - is natural and powerful to give the listener the impression of being there when the audio was recorded.
- Unique configuration of large-diaphragm capsules offer pristine sound quality and exceptionally low noise
- Natural and powerful sound reproduction
- Innovative coincident capsule configuration produces accurate stereo image in smaller housing
- Compact, lightweight design is ideal for camera-mount use, but can also be used in the studio
- Excellent channel separation
- Phantom power operation—for use with professional equipment
- Diaphragms are 24.3mm diameter and a thickness of 2 microns
- 155 dB SPL, with 10 dB pad (nominal)
- Switchable low-frequency roll-off and 10 dB pad
- 80Hz Low cut filter with a slope of 12dB/octave
- Low self noise (14dB)
- Includes one balanced cable (5-pin XLRM at the microphone end and two 3-pin XLRM-type connectors at output end)
- Large-diaphragm capsules offer pristine sound quality
- Innovative coincident capsule configuration produces accurate stereo image
- Compact, lightweight design is ideal for camera-mount use
- Excellent channel separation
- Switchable low-frequency roll-off and 10 dB pad
- Operates with phantom power only
-
Element Fixed-charge back plate permanently polarized condenser Polar Pattern X/Y Stereo Frequency Response 20 - 17,000 Hz Open Circuit Sensitivity -32 dB (25.1 mV) re 1V at 1 Pa Impedance 170 ohms Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) Channel Balance < 2.5 dB Low Frequency Roll Off 80 Hz, 12 dB/octave Switches Flat, roll-off; 10 dB pad (nominal) Dynamic Range 131 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 80 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 7 mA typical (both channels total) Weight 269 g (9.5 oz) Dimensions 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter Output Connector Integral 5-pin XLRM-type Cable 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch
| Connector | XLR |
| Highest frequency | 17000 Hz |
| Impedance | 170 ohm |
| Lowest Frequency | 20 Hz |
| Max. SPL | 155 dB |
| Polar Pattern | M/S Stereo |
| Type capsule | Condenser |
| Type microphone | Stereo |
| Warranty | 24 months |
In the specification chart
Package size: 13 x 7 x 7 cm
Package weight: 1.53 kg
-
157.19 EUR excl VAT -
340.37 EUR excl VAT -
144.41 EUR excl VAT
152.93 EUR excl VAT -
229.61 EUR excl VAT
246.65 EUR excl VAT -
889.91 EUR excl VAT -
1 060.31 EUR excl VAT