297.77 EUR excl VAT

Audio-Technica AT8035 LINE + GRADIENT CONDENSER MICROPHONE, 369MM
Please fill your E-mail address where you want to receive the availability notification for Audio-Technica AT8035 LINE + GRADIENT CONDENSER MICROPHONE, 369MM or your contact phone number.
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Provides the narrow acceptance angle desirable for long-distance sound pick
- Excellent sound rejection from the sides and rear of mic
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- Deliver with stand clamp, windscreen, battery and protective carrying case
The AT8035 is ideal for videos and movies but should be installed outside of the image, in other words, out of camera range. This type of microphone, provided with an interference tube in front of the capsule, which cancels a large part of its off-axis.
Audio-Technica's Line and Gradient Condenser Microphones combine a directional capsule ("gradient") and an interference tube which removes the sound from the rear. Generally, the interference tube of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Short condenser microphones do not have as long a range as shotgun models, but in some cases are preferred for their greater acceptance angle, when the accuracy of the source is less important.
- 369mm Shotgun Microphone, designed for video production and broadcast (ENG/EFP) audio acquisition
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Captures sound with high intelligibility in noisy environments with its excellent sound rejection from the sides and rear of mic
- Two power modes (battery or phantom power) for versatility
- 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
- Effective protection against interference from nearby mobile phones and other unwanted radio frequencies
- Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carry case
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Line + gradient |
Frequency Response | 40-20,000 Hz |
Open Circuit Sensitivity | Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa |
Impedance | Phantom: 250 ohms Battery: 300 ohms |
Maximum Input Sound Level | Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D. |
Low Frequency Roll Off | 80 Hz, 18 dB/octave |
Switches | Flat, roll-off |
Dynamic Range | Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 72 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Battery Type | 1.5V AA/UM3 |
Battery Current/Life | 0.4 mA / 1200 hours typical (alkaline) |
Weight | 170 g (6,0 oz) |
Dimensions | 369.0 mm (14.53") long, 21.0 mm (0.83") diameter |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case |
Connector | 3.5mm stereo |
Highest frequency | 20000 Hz |
Impedance | 250 ohm |
Lowest Frequency | 40 Hz |
Max. SPL | 132 dB |
Polar Pattern | Line & Gradient |
Type capsule | Condenser |
Type microphone | Shotgun |
Warranty | 24 months |
Camera mount; microphone stand clamp; foam windscreen; AA battery
Package size: 5 x 6 x 6 cm
Package weight: 1.39 kg