187.01 EUR excl VAT

Audio-Technica AT2050 MULTI-PATTERN CONDENSER MICROPHONE
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
- High performance and reliability
- Large dual diaphragm capsule for smooth, natural sound and low noise
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards
- Switchable 80 Hz high-pass filter and 10 dB pad
- Very versatile; ideal for voice, percussion, strings, amps, and drum kits
- Robust metal construction with enhanced protection grille for excellent protection of the capsule
-
“DUAL DIAPHRAGM CAPSULE”
The dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use.
“MULTI-DIRECTIVITY”
The AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings, that give it great versatility, depending on the type of recording and the sound source to capture.
“SWITCHABLE LOW CUT AND FADER”
An integral 80Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high pass position reduces the microphone's sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations.
-
Element Externally-polarized (DC bias) condenser Polar Pattern Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern Frequency Response 20 - 20,000 Hz Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa Impedance 120 ohms Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) Low Frequency Roll Off 80 Hz, 12 dB/octave Dynamic Range 136 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 77 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 4.7 mA typical Weight 412g Dimensions 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter Output Connector Integral 3-pin XLRM-type Accessories Included AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Connector | XLR |
Diameter | 52 mm |
Highest frequency | 20000 Hz |
Impedance | 120 ohm |
Lowest Frequency | 20 Hz |
Max. SPL | 159 dB |
Polar Pattern | Cardioid, Figure-of-Eight, Omnidirectional, Multi-Pattern |
Sensitivity (0dB=1V/PA 1KHz) | 42 dB |
Signal to noise | 77 dB |
Size | 170 x 52 mm |
Type capsule | Condenser |
Type microphone | Studio |
Weight | 0.412 kg |
Warranty | 24 months |
AT8458 shock mount for 5/8
Package size: 25 x 7 x 7 cm
Package weight: 0.97 kg