Audio-Technica AT875R LINE + GRADIENT CONDENSER MICROPHONE, 175MM

Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

• Extremely short in length (under 7"/175mm) ideal for use with compact digital cameras and broadcast (ENG/EFP) audio acquisition
• Provides the narrow acceptance angle desirable for long-distance sound pickup
• Ideal for mobile applications and corporate reports
• Very light, it is easily mounted on a compact camera or digital video camera equipped with an XLR input with phantom power or when connected to a microphone preamp or recorder that can supply the microphone
• Excellent sound rejection from the sides and rear of mic
• Very balanced frequency response with a slight bump at 5 kHz
• Tailored response minimizes camera and handling noise
• Operates on phantom power only
• Comes with a foam windscreen, a stand clamp, two O-rings and a soft carry case

  VERY SHORT SHOTGUN MIC

  The AT875R is one of the shortest shotgun mics on the market. Its small size and quality of its audio capture are superior to competitor products in the range.

  60° SOUND CAPTURE ANGLE

  Its very narrow acceptance angle (60°) is desirable for long-distance sound pickup, whilst maintaining excellent rejection of off-axis noise.

  LINE + GRADIENT

  The AT875R combines a directional capsule (gradient) and an interference tube to remove unwanted sound from the rear.

  Element	Fixed-charge back plate, permanently polarized condenser
  Polar Pattern	Line + gradient
  Frequency Response	90-20,000 hz
  Open Circuit Sensitivity	-30dB (31.6mV), re 1V at 1 Pa
  Impedance	100 ohms
  Maximum Input Sound Level	127 dB SPL, 1 kHz at 1% T.H.D.
  Dynamic Range	107 dB, 1 kHz at Max SPL
  Signal-to-Noise Ratio	74 dB, 1 kHz at 1 Pa
  Phantom Power Requirements	11-52V DC, 2 mA typical
  Weight	80 g
  Dimensions	175.0 mm (6.89") long, 21.0 mm (0.83") diameter
  Output Connector	Integral 3-pin XLRM-type
  Accessories Included	AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8133 windscreen; soft protective case