Audio-Technica ESW-R4180DAN 8-Channel Receiver with DANTE

• The demand for wireless microphones has grown as a result of the increasing prevalence of videoconferencing and web conferencing. Audio-Technica’s Engineered Sound Wireless System is a DECT wireless system that offers simple, smart, and scalable high-quality audio. This system overcomes many challenges of conventional wireless microphones, such as frequency coordination and the limited number of simultaneous microphones.

  Operation is incredibly easy for end users, with microphones ready to use by simply removing them from the charging station. At full charge, the batteries offer all-day operation. Installation is also made easy using PoE to power the receiver(s) and Dante audio output capabilities. System integrators are able to configure detailed settings to meet a wide variety of end-user needs. Wiring is as simple as connecting a single Cat 5e cable to a PoE network switch.
  
  Seamless setup and management is controlled via Audio-Technica’s Wireless Manager software, which is capable of managing multiple wireless systems, including UHF wireless systems, from a single screen. In addition, AES256 encryption comes standard, providing superior security and reliable operation.

• Features
  • Automatic DECT-based frequency management
  • Up to 192 simultaneous usable channels Simple setup with Cat 5e cable and 8-channel audio output and Dante support
  • Standard mode (96 channels) minimizes latency, and HD mode (192 channels) maximizes the number of channels
  • Selectable RF power output to optimize coverage area
  • Compatible with Audio-Technica’s Wireless Manager software for centralized management of system settings and operations
  • Presets allow transmitters to be customized for multiple applications
  • Roaming function allows transmitters to connect to multiple receivers within preconfigured rooms/areas
  • Long-lasting internal lithium-ion batteries for all-day transmitter use
  • Sound quality optimized for intelligible, crystal-clear audio
  • Adjustable high-pass, transmitter gain, and volume for each receiver channel
  • AES256 encryption support for superior security
  • Compatible with Syslog protocol
  • Ability to configure, monitor, and save device settings as projects in Wireless Manager
  • DECT RF scan identifies number of available DECT wireless channels via A-T’s Wireless Manager software

• Onboard LEDs verify link status at a glance
• Dual network ports allow Dante and IP control separation
• Supports mixed output for situations with limited input channels

Modulation mode -  A-field: π/2-BPSK B-field: π/8-8PSK
RF sensitivity - < -90 dBm
Network interface - Dante: 1 Gbps IP control: 100 Mbps
I/O connector - Network/Dante: RJ-45
Power consumption - 4.8 W
Power requirement - PoE (IEEE 802.3af Class 0)
Operating temperature range - -10ºC to +50ºC
Dimensions - 228.6 mm × 228.6 mm × 43.5 mm (W×D×H）
Weight (without accessories) - 620 g
Included accessories - Mounting bracket

Overall system specifications
Operating frequencies*1 - DECT Mode 00 (Europe, Asia): 1,880 to 1,900 MHz
Dynamic range - > 105 dB (A-weighted), typical
Total harmonic distortion - < 1.0%
Operating range*2 - Up to 100 m with RF output power Mid S
ystem frequency response*3 - Standard: 20 to 20,000 Hz HD mode: 20 to 20,000 Hz
Receiving system - Diversity
Latency (ESW-R4180DAN) - Standard: 16.7 ms typ. HD mode: 24.0 ms typ.
Audio sampling rate - Standard: 24 bit, 48 kHz HD mode: 24 bit, 48 kHz
Encryption scheme - AES256
RF output power*4 - MAX: 250 mW, High: 100 mW, Mid: 30 mW, Low: 10 mW, Min: 2 mW (switchable)
Maximum simultaneous use (ESW-R4180DAN)*5*6 - Standard: 96 Channels HD mode: 192 Channels
[1] It is set to DECT Mode in accordance with national laws and regulations.
[2] Open range environment with no interfering signals.
[3] Depending on attached microphone element. [
4] Note that transmitting power due to local regulations.
[5] In case of DECT Mode 00/24.
[6] Depending on region and the environment.

ESW-R4180DAN
Modulation mode A-field: π/2-BPSK B-field: π/8-8PSK
RF sensitivity - < -90 dBm
Network interface - Dante: 1 Gbps IP control: 100 Mbps I/O

• Monitor transmitter status, audio level, remaining battery time, and other information in A-T Wireless Manager